Important Note:

The printer will not monitor the Maintenance tank during an Init Fill. Please make sure the maintenance is empty or near empty before proceeding. Trash maintenance tank when finished. Never do 2 Init Fill with the same maintenance tank!

Epson pro 4000 printers:

1. Start with the printer power OFF
2. Hold the Left, Down and Up buttons while turning the printer ON. The printer will start in “Self Testing Mode”. 3. Scroll to and select CLEANING.
4. Scroll and select INIT FILL.
5. When finished, exit Self Testing Mode by turning the printer OFF, then back ON.

Epson pro 4800/4880 printers:

1. Start with the printer power OFF
2. Hold the Pause, Down and Right buttons while turning the printer ON. The printer will start in “Maintenance Mode3″.
3. Scroll to and select CLEANING.
4. Scroll and select INIT FILL.
5. When finished, exit Maintenance Mode by turning the printer OFF, then back ON.

Epson pro 7600/9600 printers:

1. Start with the printer power OFF
2. Hold the Down, Up and Cut/Eject buttons while turning the printer ON. The printer will start in “Diagnostics Mode”.
3. Push the Menu button, scroll to and select CLEANING.
4. Scroll and select INIT FILL.
5. When finished, exit Serviceman Mode by turning the printer OFF, then back ON.

Epson pro 7880/9880 printers:

1. Start with the printer power OFF
2. Hold the Down, Right/Menu and Center Cut/Eject buttons while turning the printer ON. The printer will start in “Self Testing Mode”.
3. Scroll up to CLEANING, and select by pushing the right/Menu button.
4. Scroll and select INIT FILL.
5. When finished, exit Self Testing Mode by turning the printer OFF, then back ON.

Epson pro 7890/9890 or 7900/9900 printers:

1. Start with the printer power OFF
2. Hold the Menu/Right, Paper Feed/Down and OK buttons while turning the printer ON. The printer will start in “Serviceman Mode”.
3. Push the Menu button, scroll to and select CLEANING.
4. Scroll and select INIT FILL.
5. When finished, exit Serviceman Mode by turning the printer OFF, then back ON.