Welcome to Veramax Store

How do I switch from cheap third party inks to Veramax?

  1. Start by printing a full coverage job with colorimetric certification if applicable. Make sure to have a nozzle check test print included. Keep this print as a reference.
  2. Insert refillable cartridges full of Veramax cleaning solution in your printer with a new maintenance tank.
  3. Power up your printer in service mode to do an Init Fill (Init Fill Procedures Epson Stylus Pro)
  4. Replace parking unit assembly and wiper blade. If necessary, using cleaning fluid, clean around the print head to remove any ink build up with a lint free tissue. Never use plain water.
  5. Throw out the maintenance tank. Replace the refillable cartridges by the Veramax Pro cartridges and install a new maintenance tank.
  6. Power up your printer in service mode to do an Init Fill (Init Fill Procedures Epson Stylus Pro)
  7. Once complete throw out the maintenance tank, replacing it by the first maintenance tank. Restart printer normally. Let the printer sit for 5 minutes before printing a nozzle check. Do printer cleanings if necessary to get all the nozzles firing properly. Note that air bubbles might be in your ink lines because of the Init Fill. If after multiple cleanings you still have missing nozzles wait 24 hours and check again.
  8. Print the same full coverage job with colorimetric certification if applicable. If the result is unsatisfactory start a recalibration in your printer's RIP.